EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN SERIES CONTROLLE
EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Solar Charge Controller is usually a very productive photo voltaic controller suitable for off-grid photo voltaic systems. Determined by multiphase synchronous rectification technological know-how, it ensures optimized Power conversion and program security for a wide array of photovoltaic (PV) purposes.
Critical Options of the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller technologies for outstanding solar Strength harvesting. Essential capabilities include things like:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Advanced MPPT Algorithm with >99% effectiveness.
Twin-Stage Charging for Improved battery daily life.
Liquid crystal display Display with real-time data monitoring.
A number of Load Management Modes like guide and timer.
Extensive Electronic Protections in opposition to overcharging, in excess of-discharging, limited circuits, and reverse polarity.
Phase-by-Phase Guidebook to Creating the EPEVER Tracer AN Series Controller
1. Unboxing and Preparing the Controller
Ensure all factors are bundled: Tracer AN device, temperature sensor, conversation cables, and consumer manual.
Verify the product selection and voltage scores match your photo voltaic panel and battery technical specs.
two. Mounting the Cost Controller
Choose a nicely-ventilated, dry location near the battery lender.
Safe the Tracer AN controller using the offered mounting brackets.
Keep suitable clearance for heat dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Always abide by right basic safety protocols and ensure the program is driven off just before connecting components.
Move one: Link the battery terminals towards the demand controller (beneficial to optimistic, unfavorable to negative).
Action 2: Connect the photo voltaic panel array for the PV input terminals.
Move three: Connect the load terminals if employing a direct load connection.
Move 4: Double-Verify all connections for polarity and tightness.
four. Configuring the Controller Configurations
Ability over the controller by connecting the battery initially.
Make use of the LCD Exhibit to navigate the options menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Guide, timer, light Regulate.
5. Checking and Info Logging
The Tracer AN Series supports authentic-time monitoring utilizing the MT50 remote meter.
Data is often logged by way of the RS485 interaction port employing software program which include Solar Station Laptop.
Remote checking is feasible Using the EPEVER WiFi module.
six. Troubleshooting Frequent Challenges
Situation 1: No Electricity Output
Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem two: More than-Voltage Security
Verify the photo voltaic array’s voltage rating.
Change method parameters if important.
Problem three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations within the menu.
Great things about the Tracer AN Series with MSR Technological know-how
The multiphase synchronous rectification engineering makes sure:
Larger Performance: Decreased Electricity losses throughout conversion.
Improved Trustworthiness: visit here Steady effectiveness below variable masses.
Longer Battery Daily life: Dependable and correct charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation is definitely an Extraordinary option for optimizing solar power era and increasing battery lifestyle. By adhering to the above mentioned setup guidebook, people can make certain maximum efficiency and process longevity.